|
Item#
|
EUC-2000
|
|
Description
|
Micro
Slim Snake Underwater Color Camera w/ Micro Super Bright White LED
|
|
Image
Sensor
|
Sony
1/3" Super HAD Color
CCD
|
|
Lens
|
Fixed
Built-in 3.7mm Multi-Layer Pinhole Lens (FOV: - 90º Diagonally)
|
|
Max.
Depth
|
Maximum
depth can be submerged vertically up to 165ft (50M)
|
|
Signal
System
|
NTSC
for USA, Canada, Asian countries etc...
(*Optional: PAL for
Eastern Europe & France, etc... )
|
|
LED
|
 Super
Bright Micro White LEDs (Life span -
Appx. 20,000hrs)
|
|
Night
Visibility
|
Appx.
6ft (2M) in the total darkness when LEDs are turned on
|
|
Day
Visibility
|
Appx.
3 inches from the camera to infinity
|
|
|
 Video
clip sample viewed inside Ø1 1/4" pipe...
Click the left image to play the video clip sample.
Also click the following link or paste it to your web
browser to re view all available night vision image samples.
http://www.EZspyCam.com/R-img-daynightvision.htm
|
|
Video
Connector
|
RCA
Jack
|
|
Video
Resolution
|
420
TVL (270K pixel)
|
|
Power
Consumption
|
DC
12V±1V
/ 150mA (1.8Watts)
|
|
Minimum
Illumination
|
0.01
LUX at Lamp off
|
|
Weight
/ Dimension
|
1.5oz
(42.5gr)
/ Φ20×L72mm
(Φ0.78”xL2.83”)
|
|
Electronic
Shutter
|
1/60~1/100,000/Sec
|
|
Special
Feature
|
Auto
White Balance (AWB) / Auto Gain
Control (AGC)
|
|
Warranty
|
One Year
Full Warranty including Parts & Labor
|
|
Camera
Set Includes
|
2-way
Power Splitter; AC/DC Power Supply Installation Guide; Spec Sheet
*Underwater
cables sold separately
|
|
Cable
Specification
|
The
5-pin custom made underwater cable only fits to this particular
model of the underwater camera and sold separately. Please note that
the camera and cable will be pre-assembled securely protecting with
heat shrink when you order together with the underwater cable.
Click the following link or paste the following link for more details.
http://www.EZspyCam.com/index-cable-underwater.htm
|
|
Special
Instruction
|
*This
camera is not designed for use in the saltwater or chemical pool and
so should be used only in the freshwater
environment. It may be submerged in saltwater for short period
less than an hour, but the remain saltwater contents on the camera
should be washed away thoroughly with warm water
to prevent corroding.
|
|
*Unless
it is pre-requested, the
underwater cable that pre-affixed with the
camera at the factory should not be
separated, otherwise the
warranty will not cover when the camera malfunctions that
caused by unauthorized modification done by the customer.
|
|
*Click
the following link or paste it to you web browser to make sure to review
a
proper way
to purchase the right underwater camera set of EZspyCam
before just purchase it.
http://www.EZspyCam.com/PG-UnderwaterCam.htm
|
 |
|
*Click
the following link or paste to your web browser to
make sure to review Installation Guide of the
underwater camera and cable.
http://www.EZspyCam.com/IG-UnderwaterCam.htm
1-Year warranty will not cover
if
the camera or cable malfunctions that
caused by
improper
installation.
|
 |
