|
Item#
Series
|
ENC-130
*Pre-order Required*
|
|
Description
|
Remote
Control Daynight Waterproof PTZ Pole Cam w/ 33ft
Cable
|
|
|
|
Item#
Series
|
ENC-130-485
*Pre-order Required*
|
|
Description
|
Remote
Control Daynight Waterproof PTZ Pole Cam w/ RS-485 Interface & 33ft
Cable
|
|
|
|
Specification:
|
|
Camera
Housing
|
Stainless
Steel for Free from Saltwater and Chemical Corrosion
|
|
Image
Sensor
|
Sony
1/4" Super HAD Color
CCD
|
|
Max.
Depth
|
Maximum
depth can be submerged vertically up to 165ft (50M)
|
|
Lens
|
x27
Optical Zoom & x270 Digital Zoom Lens
|
|
LED
|
48
Super Bright White LEDs (Life span -
Appx. 20,000hrs)
|
|
Night
Visibility
|
Appx.
250ft (75M) in the total darkness when LEDs are turned on
|
|
|
Day
Visibility: 10mm ( 0.4 inch) from the camera to infinity.
Click the left image to play the video clip sample.
|
|
Video
Resolution
|
480
TVL (410K
pixel)
|
|
Video
Out
|
1Vp-p
Composite Video
75 ohms
|
|
Video
Connector
|
RCA
Jack
|
|
Minimum
Illumination
|
0.01
LUX in
Color (Daytime) / 0.000
LUX
in B&W (Night)
|
|
Control
Interface
|
#ENC-130
Series: RS-232C
TTL
|
|
#ENC-130-485 Series: RS-485 w/ PELCO-D Protocol
|
|
Exposure
|
Auto
(CCD iris) or Manual (Switchable)
|
|
Signal
System
|
NTSC
for USA, Canada, Asian countries etc...
(*Optional: PAL for
Eastern Europe & France, etc...)
|
|
Electronic
Shutter
|
NTSC=1/60~1/100,000/Sec
(28 Steps) ; PAL=1/50~1/100,000/Sec (28 Steps)
|
|
Sync.
System
|
Interlock
|
|
Luminance
S/N
Ratio
|
Over
48dB
|
|
OSD
Adjustable Camera Functions
|
FOCUS
SET
-
Focus
Mode Set Push, Auto, Push-Auto
-
Focus
Minimum Distance - 10mm ~ 5M
-
Zoom
Start Set: x1 ~ x26
-
Zoom
End Set: x27 ~ x270
-
Zoom
Speed Set: Slow, Middle, Quick
-
Zoom
Tracking Mode: On / Off
AWB
SET
-
WBC
Preset Mode Auto, Push Auto, Manual, Outdoor, Indoor,
Customize
AE
SET
-
AE
Mode Set Auto, Iris Manual, AGC Manual
-
Iris
Manual Adjust 85 min. ~ 221 Max.
-
AGC
Manual Adjust 0 ~ 255 Max.
-
Brightness
Adjust 0 ~ 99 Max.
-
Backlight
Set On, Off, or Auto
-
Flickerless
Set On / Off
-
Shutter
Speed Set
Normal
, 1/250, 1/10000
SPECIAL
SET
-
User
Title Set
-
Sharpness
Adjust Set 0, 10, or 15
-
Mirror
Set On / Off
-
Customize
Color Setting On / Off
-
Negative
Mode On / Off
-
Wide
Color Burst for
Long
Range
Video On / Off
MOTION
DETECTION
|
|
Dimension
|
Φ80xL140mm
(Camera Head Only)
|
|
Weight
|
4LBS
10oz (Camera Head Only)
|
|
Power
Consumption
|
DC12Vą2V/
Less than 4W
|
|
Operating
Temperature
|
0ēC
~ 40ēC (32ēF ~ 104ēF) ; Humidity - 10%RH ~ 80%RH
|
|
Warranty
|
One Year
Full Warranty including Parts & Labor
|
|
Detachable Pole Mount Monitors
|
5.6"
Monitor - Pole mount pre-assembled & click
here to review the monitor specification
|
|
7"
DVR Monitor - Pole mount pre-assembled & click
here to review the monitor specification
|
|
Telescopic
Pole
|
*
Selectable
from 4~8ft or 6~18ft
- click
here to review more product details
* Requires only a screw driver to assemble or disassemble the camera
and cable
from the pole.
* Components consist of Water Resistant Fiberglass
Pole, Die cast Metal Thread, &
Anodized Aluminum Sliders
* The camera holder features 13-postion and 270 degree
adjustable angle.
|
|
Parts Includes
|
Underwater
Camera pre-assembled on Pole & 33ft Cable, 2-way Power Splitter,
AC/DC 12V Power Adapter, Quick Starter Guide, Extra Accessories of
Pole Assembly Kit, Underwater
Camera pre-assembled on Pole & 33ft Cable, 2-way Power Splitter,
AC/DC 12V Power Adapter, Quick Starter Guide, Extra Accessories of
Pole Assembly Kit, Pole Mount Monitor when optionally purchased
|
|
Special
Instruction
|
*
This telescopic pole is designed to extend downward, but when
necessary to extend sliders upward, you must handle it exactly
according to the instruction manual. Otherwise
you will be responsible for repair that caused by damages incurred by
improper operation.
|
|
*Unless
it is pre-requested, the
underwater cable that pre-affixed with the
camera at the factory should not be
separated, otherwise the
warranty will not cover when the camera malfunctions that
caused by unauthorized modification done by the customer.
|
|
*This
camera is specially designed to use in the saltwater or chemical pool,
but it's strongly recommended to wash all equipments thoroughly with warm water
after every use for 100% free from corroding as you clean up with
scuba gears.
|
